Modern communication systems have traditionally exploited three regions of the electromagnetic spectrum: radio waves, infrared and visible. Evolution in these ranges is always accompanied by the appropriation of new electromagnetic phenomena to build devices with better characteristics. In these three regions, great advances have been made in recent years. For that reason, in this issue, we call for papers concerning the biggest challenges these technologies may face in the years to come.
The first region to be explored is radio waves, in which wireless communications have seen great developments. Antennas, for example, have always been fundamental parts of wireless communication systems, from the simplest AM radio transceiver to the most complicated smart phone, mm-wave imaging device, or wireless power transfer solution. A great deal of industry efforts focus on new and future applications connected in the so-called Internet of Things (IoT), such as autonomous cars, smart cities, wearable devices, industrial internet, smart homes and connected healthcare, among others. Such applications would require a massive amount of data, faster speeds and, of course, complicated antenna systems working in a wide range of frequency bands [
It is therefore broadly accepted that traditional antenna technology needs a leap forward in order to create integrated antenna solutions for 5G and other advanced new and future applications. And that step is already being taken with a lot of new developments, approaches and materials whose ultimate goal is to improve antenna performance. From 3D printed antennas based on metal plated polymer materials for satellite communications, to miniaturized metamaterial-based antennas allowing beam steering without phase shifters, high-performance electrically small fractal antennas, mm-wave phased arrays on low temperature co-fired ceramic (LTCC), and plasma-silicon devices for efficient beamforming, the future looks promising [
In the infrared region, optical fibers are the preferred transmission channel. Such fibers have been extensively used in metropolitan networks for long-haul terrestrial and transoceanic links because, compared to other technologies, they offer several advantages, such as low-loss, large bandwidth, and electromagnetic immunity, among others. Since 2000, the traffic in optical communications networks has grown exponentially, nearly 50% to 60% per year, as shown by Bell Labs [
An interesting alternative to fiber optic communications is the use of free space optical communications (FSO)[
Nowadays, solid state lamps are universally present in our lives, both as a lighting medium and in ubiquitous systems such as smartphones. The possibility of using OCC (Optical Camera Communications) systems in this type of devices opens a new field of high-security communications that can be employed in different areas: real time location, identity verification, key sharing in areas such as verification of secure payments, electronic commerce, or video games. Additionally, in the fields of communications between vehicles (V2V) or between vehicles and infrastructure such as tunnels or traffic lights (I2V), this technology offers solutions for the transmission of vehicle diagnosis as well as intelligent driving systems. Moreover, the recent adoption in the United States of a regulation that forces manufacturers to equip new vehicles with a front camera offers a window of opportunity for new technological developments.
The call for papers on the topics above prompted a very positive response from researches around the world. As consequence, we received 17 submissions from Colombia, Argentina, Mexico, and Poland. We were delighted to witness the massive response by our colleagues, who reported interesting research results related with different fields: networks defined by software, visible light communications, wireless sensors, mobile communications, electro-optic devices, radio over fiber, optical communications, and RF devices. Afterward, a careful and rigorous peer review process of the papers was carried out with the help of expert colleagues in related fields, who voluntarily examined these works (our goal is to have at least two reviewers per paper). After the review process, we calculated the acceptance rate: 17.65%. Besides, four other manuscripts required major changes and continue with the editorial process to be included in future issues. These statistics show the high quality of the works published in this issue, in which we present the following three papers on advances in electromagnetic applications and communications.
In the first work of this issue, the authors propose the Bidirectional single-sideband transmission of millimeter waves over fiber for 5G mobile networks. Their manuscript presents an interesting architecture for bidirectional transmission of millimeter waves over optical fiber using bidirectional single-sideband modulation in order to generate an optical subcarrier for the downlink transmission and a second subcarrier for the transport of the uplink. The optical subcarriers were generated using single-sideband modulation in a Mach-Zehnder electro-optical modulator. Finally, they validated the performance of the proposed architecture by analyzing typical indicators such as BER and Error Vector Magnitude in both the downlinks and the uplinks.
Next, the article titled Quality of service evaluation based on network slicing for software-defined 5G systems reveals the possibility of assessing the quality of services by adopting the network slicing approach for 5G networks and using a software-defined network environment. Floodlight, the open-source controller implemented in that work, was responsible for making bandwidth allocation decisions. The main contribution of said manuscript is describing the capacity of this type of solutions to control bandwidth resources, which allows to guarantee latency and reliability values. Therefore, they enable to reduce the loss rate by 10% in a congested network and assure delays under 700ms for typical commercial applications.
Finally, First principles calculations of the electronic and dielectric properties of λ-Ta2O5 delves into some physical properties of an orthorhombic λ-Tantalum pentoxide model without oxygen vacancies by applying the density functional perturbation theory. The authors obtained a set of interesting results related to the prediction of the crystalline structure of the model, the structure of electronic bands, dielectric tensor components, and optical response (refractive index, extinction coefficient, and transmittance). This material is of great interest for the development of modern electromagnetic devices for microwave applications such as antennas, filters, or resonators where the material plays an important role in performance and size.
The other seven papers published in this issue were submitted following the regular call for papers, which is permanently open. At the end of the process, a total of 37 manuscripts were evaluated and 10 of them (27%) were accepted to be part of this issue.